DIY: How To Create A Fabulous Furry Stool

The Manhattan home of fashion designer Joseph and Kimberely Mimran.  Photo by Simon Upton

The Marc Bankowsky “Pieds De Bouc” Round Stool  at 1stdibs  – $9500

From the moment I saw that furry treasure with the golden legs I fell in love and had to have one until I checked out the price on 1stdibs – $9500.  I don’t think so.

I searched for an alternative and found the Jonathan Adler bench below.  It’s larger and equally adorable but at a price of $1995.  it was still out of my range.  So, the idea of acquiring my own furry treasure was put on serious “are you kidding me” pause, but when I have visions of beauty dancing through my head I never give up hope.

Jonathan Adler Mongolian Lamb fur bench – $1995.

This Jonathan Adler bench is just fabulous at the end of this bed.  Photo via Jonathan Adler.

Then one day as I was walking through Ikea inspiration starred me in the face the moment I saw their display bin full of sheepskin rugs.  I knew my desire for a furry stool was within reach because imagination and inspiration had finally met.

When my desire and imagination met an Ikea sheepskin rug my furry stool became a reality.

Here’s what I used and did to create my furry stool:

Supplies:

• 1 Sheepskin rug

• 1 Piece plywood (cut 16″ either round or square)

• 1 Piece 3″ upholstery foam cut same size as plywood

• 4 legs atleast 6″ tall Or 2 square legs atleast 10″ tall

• Hardware for legs to attach to plywood and screws

• Staple gun & Spray adhesive

Instructions:

Step 1 – Draw a circle the size you desire and cut it out.  Often you can have this done at the hardware store if you buy the wood there.

I used a jigsaw to cut my circle.  You could make your stool square if you don’t have the ability to cut a circle.

Step 2 – Cut the foam cushion the same size as the wood and attach it with spray adhesive.

Step 3 – Use a staple gun and attach the sheepskin to the wood.  Trim as necessary.

Step 4 – Attach the hardware for the legs to the wood.  Paint the furniture legs and let them dry.  Once dry attach the legs to the hardware.

Step 5 – Fluff the sheepskin and put your feet up.  You’re done!

This stool looks so expensive I can hardly believe it cost me less than $100. to make.

Not bad huh!  – Do you like the results?

If you have a desire and imagination just keep the idea fresh in your heart.

Sooner or later you’ll find a way to make it a reality.

Until next time …